• Chinese English
    Home About us Honor Products Feedback Contact us
     
     
    Thermocouple and thermistor which is applicable in power station

    Thermocouple and thermistor which is applicable in power station

        Thermal sherthed type thermocouple (H-WR▢K-93S )(Scouring-proof thermocouple)
          Temperature range 0~600℃, it is mainly used for measuring the temperature of the steam channel and the boiler. It has a whole-drilled protective tube, so it improves the operating life and the intensity. Special material resists special media's eashout.
    Thermocouple and thermistor it is applicable in power station
        High-voltage high-temperature thermocouple (H-WR▢K-930-T)
          Operating temperature 0~800℃, pressure is less than 30MPa. Special material resists special media's washout.
    High-voltage high-temperature thermocouple
        Middle-voltage middle-temperature thermocouple (H-WR▢K-930)
          Operating temperature is less than 500℃, pressure is less than 14MPa
    Middle-voltage middle-temperature thermocouple
        Low-voltage low-temperature thermocouple (H-WR▢K-630)
          Operating temperature is less than 260℃, pressure is less than 2MPa
    Low-voltage low-temperature thermocouple
        The wall of the boiler thermocouple (Inserted piece type thermocouple) (S-WR▢K-010-Z)
          The thermode contact is fixed on the heat conduction plate, it is used for measuring temperature of the walls of boiler or furnace or the surface of other equipments.
    The wall of the boiler thermocouple (Inserted piece type thermocouple)
        Smoke channel wind channel thermocouple (H-WR▢K-23S)
          Temperature range 0~800℃, is applicable to measure temperature the smoke channel and wind channel.

    Smoke channel wind channel thermocouple (H-WR▢K-23S)

        Pressure spring type thermocouple (thermistor) T-WR▢K-800-Y  T-WZPK-800-Y
          It is use expanding and pulling principle of pressure spring measured object surface is compressed by thermocouple (thermistor) end. It has the advantages, quick in reaction, feasible in installation, etc. It is applicable to measure temperature of bearing and equipment surface or piping in small diameter.
    Pressure spring type thermocouple (thermistor)
        Electromotor coil thermistor
          It is used for measuring the surface temperature of the electromotor coil and stator, temperature range -50~150℃
    Electromotor coil thermistor
        Bearing thermocouple or thermistor
          It is mainly used for measuring the bearing temperature of each type of bearing equipment in the power station, it's measured end is close-fitted to in surface of measured bearing, and so ensure measuring accuracy.
    Bearing thermocouple or thermistor
        Oil proof thermocouple or thermistor
          It to use oil proof lead wire thermistor measured range 280℃, thermocouple measured range 400℃
    Oil proof thermocouple or thermistor
        Wearproof armoured thermocouple or thermistor
          Surefoace is to use repair melding applicable to granular scouring in toner dust, measured range is 0~900℃
    Wearproof armoured thermocouple or thermistor
        The other type thermocouple (thermistor)
    The other type thermocouple (thermistor)



    Pre:Wearproof thermocouple and protective sleeve which Next:Complementary Lead Wire Series

    All right©Lunte Electronic Meters Add:No.E-1, West Industrial Zone, Hongqiao Town, Yueqing City, Zhejiang Province, China (325608)  
    快3投注网